Tires/Tubes

Speaking for itself, Raddler is the radder version of our famed Riddler tread pattern. It combines the expeditious efficiency of a short-knob centerline with get-rad traction of chunky outer knobs. Let's call it a semi-slick, but one designed to increase confidence while you're pushing the limits of gravel. Raddler is an excellent choice for loose terrain where traction takes priority, but efficiency is never far behind. Lean it over, take the inside line, brake late, and stay pinned with the Raddler. SG2 PUNCTURE PROTECTION: These tires are available with our all-new SG2 Puncture Protection, which is a lightweight nylon insert that provides bead-to-bead coverage and ensures every area of the tire is defended against slashes and punctures. As events become progressively rougher and cyclists pedal farther, gravel gets tougher. It only makes sense for gravel tires to become tougher as well. - Nylon fibers have a flat profile, which reduces the amount of rubber needed to fill the gaps between fibers and minimizes weight. - Protected SG2 gravel tires feature a 120tpi casing, which improves suppleness compared to a traditional 60tpi tire. - SG2 was specifically designed to be a puncture protection layer, but it also improves air retention and eliminates seeping at the sidewall. FEATURES: - Short-knob center tread cuts down on rolling resistance while still providing enough bite for out-of-the-saddle traction. - Center and intermediate knobs on the Raddler are slightly taller than those of the original Riddler, thereby increasing tire lifespan without negatively affecting rolling efficiency. - Tall, toothy outer lugs ensure your favorite gravel descent doesn't unravel in the final corner. - Single-ply 60tpi casing provides dependable protection at a minimal weight. - Available with black or tan sidewalls in 40mm and 44mm widths. - All Raddler tires are TCS tubeless compatible.

- ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 76g (1.25-1.5), 88g (1.5-1.75)

- Size: 650c x 18 – 23 - ISO Diameter: 571 / 650c - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 89-92g

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm - Wheelchair-compatible

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Specialized's Slaughter provides riders with a tire that rolls fast and still offers confident cornering. A low-profile center tread ensures low-rolling resistance and secure braking, while tall side knobs provide the bite needed for cornering traction. And, it's 2Bliss Ready so you can run lower tire pressures, yet laugh in the face of pinch flats. Paired with an aggressive front tire, the Slaughter makes an excellent rear tire. - 725 grams

Big Betty is back! Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with our much-loved Magic Mary. - Long supported braking edges for maximum braking traction - Extremely stable shoulder blocks for outstanding cornering grip - Open and aggressive tread for excellent grip and self-cleaning - Evolution line, NEW Super Trail construction - Addix Soft compound - ECE: E-50 - 1300g

THE ULTIMATE GRAVITY TIRE. Indisputably the favorite among Schwalbe Downhill and Enduro athletes, the Magic Marry offers perfect all-around characteristics for almost all tracks and conditions. The sophisticated intermediate profile is combined with the best compounds and construction, pushing the limits to surprising levels. - Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip, even in extremely muddy terrain. - Equipped with V-Grooves specially developed for Magic Mary, every stud can bite into the ground for even more grip. - Angled studs in the middle of the tread optimize the rolling characteristics.

- For a safer journey. You have full control on icy roads with the Marathon Winter Plus. - For best possible puncture protection, it comes with a SmartGuard layer. - Spikes work best on ice at the minimum pressure - At max pressure, noise is reduced to a minimum on ice-free roads.

- For a safer journey. You have full control on icy roads with the Marathon Winter Plus. - For best possible puncture protection, it comes with a SmartGuard layer. - Spikes work best on ice at the minimum pressure - At max pressure, noise is reduced to a minimum on ice-free roads.

Schwalbe One Tires. Schwalbe's fastest and most reliable competition tire. Featuring a the new OneStar Triple Compound.

Grab the right tube for your 700C tire, just choose the valve length and tube size! When it comes to valve length: - 40mm valves are ideal for 10mm—30mm deep rims. - 60mm valves are ideal for 30mm—50mm deep rims. - 80mm valves are ideal for 60mm deep rims. And for tube size: - Check your tire's sidewall to determine its size—then choose the tube whose range includes it! For example: a 700Cx28 tire will work with the 700Cx25-32 or 700Cx28-32 tubes.

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

Built on the same concept as our Gravelking and Gravelking SK models, the EXT version incorporates the same technology on top of a specially designed tread tailored to work best in muddy and sloppy conditions. Better puncture resistance while retaining the superb balance of a light riding feel and grip. - Ideal for gravel and dirt, Mud/Loose condition model, better puncture resistance while retaining the superb balance of a light riding feel and grip - Available in Black Tread and Black or Brown Wall Colors - Folding (Aramid) Bead with ProTite Shield Plus Protection - Available in 700 C and a variety of widths - TLC in widths 33mm and larger

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

Tubeless repair kit from Muc-Off.

- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The Assegai tire is designed primarily for downhill racing and aggressive trail riding in mixed conditions. The knob height falls between the Minion DHR II and the Shorty. Like the Minion tires, the center knobs are heavily ramped on the leading edge to reduce rolling resistance. A small knob located between the center tread and side knobs provides a smooth transition while cornering. The Assegai offers predictable traction, even over slippery roots and rocks. - World Cup Champion Greg Minnaar's signature tire - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible - Wide Trail (WT) construction optimizes the tire’s tread layout and profile on today’s modern, wider rims, optimized around a 35mm inner width

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The legendary High Roller returns with an all-new hybrid tread design, but the same old winning ways! Developed with extensive input and testing from Maxxis' World Cup athletes, the third generation of the High Roller is built to take on mixed conditions at high speeds - The third gen High Roller slots into the Maxxis gravity range between the Assegai and the Shorty - Widely-spaced tread clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - Built to take on mixed conditions at high speeds - Center tread uses a mid-spike design similar to the Shorty but with a lower knob height - Knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces - Cornering traction is enhanced via large, well-supported side knobs for predictable handling - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - All Maxxis tires 2.40" and up are considered WT according to Maxxis whether or not they are labeled WT - 3C MaxxGrip: the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications - DD: Designed for Enduro racing and ebike use. Two layers of lightweight 120 TPI casing material are combined with a butyl sidewall insert to create a highly durable tire with more trail feedback than a Downhill casing tire - TR: Tubeless Ready means the ability to run lower pressures, improving traction, lowering rolling resistance, and less chance of flatting - Recommended installation: Front or rear - Tire Diameter: 29" - ISO Diameter: 622 / Mountain / 29er - Labeled Size: 29 x 2.4" - Casing: 60tpi - Max Pressure: 50psi - Bead: folding - Weight: 1,299g. (29 x 2.4")

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Reaver tire is faster, lighter, and even more durable than the venerable Rambler. A low-profile tread design uses diamond knurling to reduce rolling resistance and enhance grip in dusty or loose conditions. Paddle knobs arranged in sets of three provide extra bite under hard braking. The side knobs are spaced closely together and are staggered for consistent cornering performance. A sipe (groove) in each of the side knobs allows them to flex and conform to the terrain, improving traction. - Race-ready tread design, intended to go fast on gravel and dirt - Tubeless-ready 120 TPI casing with EXO sidewall protection - Dual compound to maximize wear

The Rekon is a light duty trail tire designed to go fast in technical terrain.

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

Dynaplug tubeless tire repair plugs are constructed from viscoelastic rubber impregnated cord. The plugs are specially designed to be inserted directly into a puncture after object has been removed. - Combo pack includes x5 replacement plugs: x3 pointed brass soft nose tip plugs x2 Megaplugs - Made in USA - The Megaplugs are compatible with: Megapill tool, Megaplugger tool, and the Racer series of tools - The brass soft nose tip are compatible with all Dynaplug tools, except for Air Road tool NOTE: for Air Road plugs, please use part # 380-2020

CushCore tubeless air valves are specially designed to work with a CushCore tire insert. The air passageway is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing air flow through the valve. - Made from CNC machined from 6061 T-6 aluminum, anodized black - Tapered rubber collar permanently bonded at the sealing interface - The valve core can be removed to add tire sealant - Valve locknut with o-ring seal and valve cap are included - Sold as a set